Publicidad
STEP 7
Place the drawer into the
cabinet by sliding the box onto
the hardware until the hooks
engage the holes drilled in the
back of the drawer box. You
will hear a "click" when the
drawer box is fully engaged.
You may need to squeeze
the locking device releases
and push back to ensure the
hardware is engaged.
The drawer box can be
removed by squeezing the
arms on the locking devices
and pulling forward. Once the
drawer is installed the corners
can be raised/lowered by up
to 1/8" by sliding the vertical
adjustment lever forward/
backward. Adjust as necessary
to ensure the drawer front
aligns with the adjacent
cabinets.
4
FIG. F
Customer Service: 800-626-1126 | rev-a-shelf.com
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
Publicidad
