Style selections LT2026WWMV Manual Del Usuario página 6

2.
Using faucet kit, position faucet (H) on sink basin (A)
and hand tighten locknuts (I).
Attach hose (J) to pull-out sprayer (G) and tighten
securely.
Pass hose (J) through faucet and adjust the position of
the faucet (H) so that hose (I) does not rub against the
edge of the sink (A).
Unscrew wing nut (K) from zinc weight (L). Slide hose (J)
through wing nut (K) and zinc weight (L) then tighten in
its final position.
Attach hose (J) onto the center check valve on the
faucet (H) by turning nut counterclockwise and tighten
securely.
3.
Connect the water supply line (M) by threading the
large connector nut onto faucet (H) and tighten securely.
Repeat for the second supply line (M).
NOTE: DO NOT OVERTIGHTEN.
2
G
3
6
I
J
H
M
H
L
K
M
IS2626