jbc MSE-A Manual De Instrucciones página 5

Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Use a "non residue" classified flux and avoid contact with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
Specifications
- Total weight:
- Size:
- Vacuum:
- Flow rate:
- Ambient operating temp. 10-40 ºC / 50-104ºF
- Pedal connection
Complies with CE standards.
ESD protected housing "skin effect".
1,2 Kg (2.6lb)
145 x 55 x 225 mm
75% / 570 mmHg / 22.4 inHg
9 SLPM
w w w.jbctools.com
5 5 5