Publicidad
Idiomas disponibles
Idiomas disponibles
Connection diagram
3. Technical data
Supply voltage
See device
Contact material (115V/230V)
AgSnO
2
Contact material (12V / 24V)
AgNi
Type of protection
IP 20 to DIN EN 60529
Permitted ambiet temperature
-30°...+55°
Mode of oeration
1 BSTU
Degree of contamination
2
Rated surge voltage
4 kV
Standard
DIN EN 60730-1/DIN EN 60730-2-7
CFL, LED
Ideal for modern lamps
8. Key function
1. To access the Enter-mode from the automatic-mode.
2. To revert to the beginning of t he current (sub-) menu.
1. To adjust the flashing digit.
2. To scroll through a choice
1. Automatic-mode: To switch the channel ON or OFF until
the next programming step occurs.
2. Automatic-mode: A push longer than 3 sec. = Permanent
switching status.
1. To activate the time switch when operated without power
/
supply.
2. To confirm the selection o r the entered data.
11. Menu overview
OK
OK
OK
**At 2 channel-
version
13. New program
OK
OK
OK
OK
OK
OK
OK
OK
OK
ASTROPROGRAM:
The astro function allows you to switch the whole year
trough in relation to sunset and sunrise, e.g. for
illumination purposes (astro-ON with sunset and astro-
OFF with sunrise)
BLOCK PROGRAMMING:
Activation or deactivation of the weekday (1...7) on
which the switching time should happen. Withe the +/-
keys you can change from avtivate yes" to deactivate
"
"no". Confirm ech day with OK.
OFFSET:
While programming an astro program step there will be
no daytime (hh:ss) suggested. Instead of this you have
the possibility to enter an offset. E.G. if you like to
switch on the light 20 minutes before sunset you have
to enter an offset of minus 20 minutes while
programming astro ON.
TS-ASTRO-2-NFC 93142 und TS-ASTRO-3-NFC 93143
1. Safety instructions
The installation and assembly of electrical equipment
!
must be only carried out only by a skilled Person!
Otherwise fire danger or danger of an electric shock
exists!
Connect the supply voltage/frequency as stated on the
!
product label!
Warranty void if housing opened by unauthorised
!
person!
The electronic circuit is protected against a wide range
!
of external influences. Incorrect operating may occur if
external influences exceed certain limits
4. Service
Brück Electronic GmbH
Gerberstr. 33, D-51789 Lindlar
Telefon: +49 (0) 2266.90 121-0
Fax: +49 (0) 2266.90 121-50
E-Mail: info@beg.de
Internet: beg-luxomat.com
9. Handling advice
The time switch is programmable without external
power supply after pressing the
To revert one step or one level back while in the
Enter-Mode press
After completion of a (sub-) menu confirming end
will return the device into the automatic-mode.
With
- the choice changes from
continue
. By confirming
switch returns to the beginning of the current
(sub-) menu.
When confirming end before completion, the time
switch returns to the automatic-mode without
saving the entered data.
OK
OK
OK
OK
OK
OK
ASTROPROGRAM
S u n s e t
A s t r o
Y E S
Y E S
Y E S
Y E S
W e d n e s d a y
NO
T h u r s d a y
y e s
F r i d a y
Ye s
S a t u r d a y
NO
n o
NO
NO
22:00
5:00
+ 0 0
23:00
5:30
2. Initial operation
The time switch is delivered in sleep-mode, the display is switched off.
Press
/ -button to wake it up.
The current date and time is already programmed and European daylight savings time is activated.
Select the desired language by pressing
one step backwards from the current position)
If required, date, time and daylight savings time mode can be adjusted also by pressing
confirmation with
.
When using the astro function it is obligatory to enter the geographical position of the place of the installation of the
device. Choose with
Confirm your choice again with
Enter the nearest zip code or the geographical coordinates with
Finally, you can activate the Astro-program for the whole week (no offset) by confirming "Astro preprogrammed"! If you
choose "Astro not preprogrammed" you can individually program the Astro -function later in the programming menu. To
complete the initial operations confirm your choice with the
5. Intended use
The device fits for the particular use of the following tasks:
Illumination of private and industrial areas, street and shop-window
lightening, regulation of air conditioning, flushing, motors, pumps,
plants and machinery as well as to simulate presence etc.
Operate the device in a dry room only! The installation must be in
accordance with the instruction manual. The device is not qualified for
security relevant tasks such as emergency doors, fire protection
equipment
10. Additional adjustments
Menu
Program query
Program delete
/
-button.
Date-Time
Summertime
end
to
continue
Language
the time
Factory Defaults
Counter
PIN-Code
12. Symbol legend
erm
OK
OK
erm
EXTRAPROGRAM
You can program further "extra" switching times
e.g. if you like to use a channel of the time
switch for a non-"Astro lighting-application".
You have to activate the "extra switching times"
within the menu Options.
The "extra switching times" works like a standard
weekly program (ON / OFF). After activating
the "extra switching time" it will be offered within
the programming menu "new program".
S u n r i s e
o f f
Y E S
Y E S
Y E S
n o
NO
NO
0:00
0:00
+ 0 0
15:30
17:35
- buttons and confirm it by pressing
-buttons between „Zone" (predefined zip codes) and „Coordinates" (longitude and latitude).
. (The easiest way is choosing a predefined zip code within the „Zone"-menu.)
-buttons and confirm with
button.
6. Battery
Main menu Application
Program
To query the programming steps and remaining memory locations
Deletion of switching time(s). The program for all channels, singl e channels and
Program
single programming steps within on channel can be deleted.
Adjustment
Adjustment of date and time
Adjustment
Adjustment of the daylight saving time mode (ON/OFF)
Adjustment
Choice of languages
Adjustment
Reset to the state of delivery.
Displays the hour counter and pulse counter for each channel and the time switch
Options
itself.
The time switch can be locked with a 4-digit PIN-Code. The code can be adjusted,
Options
activated and deactivated. If you have forgotten the Code please call customer
service.
Channel is switched ON
Channel is switched OFF
For the current date the "holiday program" / "permanent by date" is activated
Standard programming step
Current state is based on a manual over -ride. The state will be cancelled with the next
programming step.
Current state is based on a manual override. The state is permanent until terminated manual.
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Astro function: Current state is based on a sunrise or sunset taking into account an optionally adjusted
Offset.
The time switch is locked; to unlock the device the PIN has to be entered.
14. Astro adjustment
PERMANENT
One permanent by date
programming step
(holiday function) for each
channel is possible.
During the desired period
(The function is valid for
OK
OK
OK
the whole days) the channel
can be switched off (perm off)
or on (perm on).
See
Point 7
15. Programming via NFC
16. Notes on battery disposal
This device contains a long-term lithium battery. In connection with
the delivery of equipment containing batteries, we are obliged to
advise you of the following:You are required by law to return used
OK
OK
OK
equipment and batteries as an end user. The return is free of charge.
EN
. (Remark: By pressing
you move
-buttons and a subsequent
7. Permanent
Permanent ON / OFF
Zone = country
OK
OK
N
S
OK
W
E
OK
OK
GMT
ZIP = zip code
OK
OK
GMT
Z
Publicidad
