Decimal Point; Temperature Unit - testo 54 Serie Manual De Instrucciones

5.4.2 Reference point compensation (Continued)
Reference point compensation
Selection in the menu
5.4.2.1 External reference point temperature
Selection in the menu
Input of the known value of the external reference
point temperature in 0,1 °C/0,1 °F, according to the
temperature unit set

5.4.3 Decimal point

Selection in the menu
5.4.5 Correction value
Inputting a correction value allows acting upon the
displayed result. These correction values may be
Selection in the menu
16
Internal reference point
compensation
External reference point
compensation
Adhere to point 5.4.2.1
External reference point
temperature
...
Decimal point
Resolution 0,1 °C/0,1 °F
Resolution 1 °C/1 °F
Setting the correction value
...
...

5.4.4 Temperature unit

Selection in the menu
positive or negative. The input is always made with one
decimal place.
...
Unit
Display in °C
Display in °F
Correction value in 0,1 °C/0,1 °F,
depending on the unit selected