Publicidad
Idiomas disponibles
Idiomas disponibles
RING OF LED LIGHT FOR TONE ENHANCEMENT.
INSTRUCTIONS MANUAL
Components and supports.
SUPPORT 1
From the ring to the tripod.
Mobile support
1. Screw the bracket 1 into the lower part of the ring.
2. Mount bracket 2 and screw it inside the central part.
3. Screw the hoop mounted to the tripod by screwing through bracket 1.
NOTE: Tripod not included in some models.
Functions.
(For models with only white light)
- "+" button. Increase the intensity of the light.
- "M" button. Changes the tone of white light.
White Light Tones: Warm / Day / Cold.
- "-" button. Dim the light intensity.
- "on / off" button. Turn the led ring on and off.
SUPPORT 2
Assembled ring
(For RGB models)
- "Up" button. Increase the light intensity.
- "Down" button. Dim the light intensity.
- "On / Off" button. Turn the led ring on and off.
- "RGB" button. Switch between various colors of light.
- "Mode" button. Switch between various shades of white.
USB adapter (Not Included)
To connect the ring to the power outlet you need to use an adapter
with a voltage of 5V and 2A (or 3A maximum).
Specifications.
Publicidad
