3.
Contact the person who set up your home network
4.
Check your router manual
5.
Contact your router manufacturer for assistance
As part of the setup process, you need the name and password that were assigned to your wireless network when it was
installed A network name is sometimes referred to as an SSID, and a password is sometimes referred to as a wireless key,
or security key
Can't find my network
If your network does not appear in the list of wireless networks:
1.
Make sure Squeezebox Radio is within range of your wireless network
2.
Go to your computer to make sure your network is working
3.
If your router is configured to not broadcast your network name (SSID), select Other Networks at the bottom of the list
of networks, and enter yours
4.
Unplug your router, wait 30 seconds, and plug it back in
5.
Refer to your router documentation or contact the manufacturer for assistance
Password not accepted
If your password was not accepted:
1.
Try entering it again There could be a typo
2.
Convert your password from ASCII to hexadecimal If your network password is not accepted, it could be in ASCII
format (This only applies to WEP passwords that are either 5 or 13 characters in length )
For more information, see our Knowledge Base at www mysqueezebox com/support
Network connection not made
If Squeezebox Radio does not connect to your home network:
1.
Confirm that you have selected the correct network name
2.
Try selecting your network name again, or rename your network If yours has a common name such as linksys,
there could be multiple networks of that name in your neighborhood One way to avoid this issue is to rename
your wireless network to a more unique name
Quick start guide
English 11