A
A
Simple solutions for everyday independence
Standard Package Contents - fig.
1 x Airflo compressor fitted with one
12v - 2.3Ah battery (A)
1 x Battery charger (B)
B
1 x 2-Way hand control (C)
1 x User instructions
Getting Started
The Airflo does not have an 'on/off' switch. To
operate the compressor or activate the Battery
Status Indicator, connect the hand control and
momentarily press either the 'Up' or 'Down' button.
If the Airflo is not used for approximately 5 minutes
C
it will go into 'sleep' mode and the battery status
indicator light will go out.
Battery Status Indicator - fig.
1
Before use, check that the battery is sufficiently
charged (see 'Getting Started'). If the battery is fully
charged, the indicator light (A) will show a steady
Green light.
Steady Green = Fully charged.
Flashing Green = Recharge soon.
Steady Red
Flashing Red
NOTE: If charge is too low the 'down' button on the
hand control will not work.
The Airflo needs to be recharged when the indicator
light is flashing Green.
2
Charge the battery overnight before first using the
Airflo.
Airflo Mk3
2
= Recharge immediately
(will not deflate).
= Over temperature cut-out
(will not deflate or inflate).
1
3