Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
CAUTION!
1.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 34 for details.
2.
This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 12 for proper installation.
3.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
®
TM
and Windows
Vista
. For Windows
bit with 64-bit CPU, there is no such limitation.
4.
Although this motherboard offers stepless control, it is not recommended to
perform over-clocking. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU.
5.
While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the motherboard
functions properly and unplug the power cord, then plug it back again. To
improve heat dissipation, remember to spray thermal grease between the
CPU and the heatsink when you install the PC system.
6.
This motherboard supports ASRock AM2 Boost overclocking technology. If
you enable this function in the BIOS setup, the memory performance will
improve up to 12.5%, but the effect still depends on the AM2 CPU you adopt.
Enabling this function will overclock the chipset/CPU reference clock. However,
we can not guarantee the system stability for all CPU/DRAM configurations.
If your system is unstable after AM2 Boost function is enabled, it may not be
applicative to your system. You may choose to disable this function for
keeping the stability of your system.
7.
This motherboard supports NVIDIA
(yellow) are intended for SLI
Express VGA card to this motherboard, please install it to PCIE3 slot. For the
information of the compatible SLI
refer to the "Supported PCI Express VGA Card List for SLI
For the proper installation of PCI Express VGA card, please refer to the
installation guide on page 14.
8.
For microphone input, this motherboard supports both stereo and mono modes.
For audio output, this motherboard supports 2-channel, 4-channel, 6-channel,
and 8-channel modes. Please check the table on page 3 for proper connection.
ASRock
ALiveNF5SLI-1394
®
XP 64-bit and Windows
®
TM
SLI
technology. PCIE2 and PCIE4 slots
TM
function. If you plan to install only one PCI
TM
Mode PCI Express VGA cards, please
TM
Mode" on page 9.
Motherboard
®
XP
®
TM
Vista
64-
7 7 7 7 7
Publicidad
Tabla de contenido
