Aromasound App Connection; Reset; Maintenance; Tips - Aromasound LAMPION Instrucciones De Funcionamiento

Aromasound App Connection

Once you have installed the Aromasound app, launch the app and then press the + button on the
home page to connect to your Lampion product. The Lampion name and image will then appear on
the connection page. Select the name and the app will then connect and allow you to control lighting,
mist, alarms and music remotely.
If you experience any problems in connection, always check to install the latest version of the app. If
you have any further problems please contact us at
phone model and operating system version you are using. i.e. Samsung Galaxy S8 – Android version
8.0

Reset

Insert a small pin into the reset hole and hold it for 2-3 seconds for the system to restore to factory
state.

Maintenance:

After 5-6 uses or 3-5 days of use, please clean the product as follows:
1) Turn off the power and disconnect the DC adaptor.
2) Completely pour out any water remaining in the tank. Do not pour out water from the air outlet side.
3) Put in a small amount of detergent diluted in water. Then, using a clean cloth, dip into the water and
gently wipe up the unit. If there is any dirt on the inner side of tank, please clean it.
4) Never use a medical diluent or alcohol during maintenance. Doing so may cause product damage
and erase some of the signs on the product.

Tips

• Please use a separate container to add water. Do not run a water tap directly into the tank.
• Pure essential oils or water-soluble oils are available for use. Please clean the unit as per the
maintenance instructions before changing to a new type of essential oil.
• It is quite normal for different humidity environments and temperatures to affect the mist density.
• Do not allow the mist to directly spray onto furniture, clothes or walls.
• The essential oils may cause dyeing. Please use a clean cloth to wipe them up in the event of
accidental spillage.
• To ensure hygienic use, please completely pour out the water and wipe the unit with a soft cloth
after each use.
• If the unit will not be in use for an extended period of time, please completely pour out any water
remaining in the tank and store the unit in a dry place.

Product specification

Paring name:
Input:
Rechargeable battery:
Tank capacity:
Bluetooth version:
Speaker power:
SNR:
Distortion:
Remark: The maximum connection distance is around 10 meters. Please place your Bluetooth
speaker as close as possible to this device to avoid connection getting disturbed.
Under the environment with electrostatic discharge, the device may be power off. (EUT could not
operate properly). It requires user reset the device by turn on the device to choose the appropriate
mode & set time again.
Lampion
DC5V – 1000 mA
3.7 V 6 600 mAh
110ml
4.2 (2.4 Ghz)
3W
>50dB
<1%
- EN 6 -
assistance@aromasound.eu and please state the