Mount The Film Roll; Adjust Film Tension; Adjust The Wrapping Settings - ITW Mima GIROTEC RDL Instructiones De Operacion

OPERATION
2.3 Mount the
film roll
1. Press the film roll
up to the lowest
surface of the film
distributor
2. Pull a length of
film off the film roll
and thread the film
around the guide
rollers as shown in
the adjacent
drawing
2.4 Adjust film
tension
Use the brake wheel to
adjust the optimum film
tension
Release roller brake (lift
brake plate up)
2.5 Adjust the
wrapping settings
1. Select wrapping mode
You may select any of
three different wrapping
modes:
- single wrap (1.)
- splash-proof mode (2.)
- double wrapping (3.)
(Wrapping mode details,
see page 8)
2. Adjust top and bottom
wrapping by pressing the
push buttons (▲ or ▼).
3. Adjust the degree of
overlap
Press info button
Adjust overlap degree by
pressing the push buttons
(▲ or ▼).
Choose one of three
choices:
- Much
- Medium
- Little
1. 2.
3.
3