Oscium iMSO2 Manual De Usario

Quickstart Guide
Oscium iMSO-204L
Mixed Signal Oscilloscope
LOGIC PROBE
ANALOG PROBE
W A R N I N G
DO NOT APPLY
MORE THAN +/-40V
IN 10X MODE &
MORE THAN -8V TO +13V
IN 1X MODE
W A R N I N G
DO NOT APPLY MORE
THAN -0.5/+7V TO THE
DIGITAL CHANNELS
LIGHTNING CONNECTOR
CONNECT TO APPLE DEVICE
1) Download "iMSO2" from the Apple App Store.
2) Connect the scope to the iPod touch®, iPhone®,
or iPad® using the Lightning connector.
Note: Blue light indicates that scope is
communicating with the application.
3) Connect Analog Probe and Logic Probe to the
appropriate ports on the scope.
4) For more information, please visit the Oscium
website at www.oscium.com
"Made for iPod" , "Made for iPhone" , and "Made for iPad" means that an electronic accessory has been
designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards. Please note that the use of this accessory with
iPod, iPhone, or iPad may affect wireless performance. Lightning is a trademark of Apple Inc.
SCOPE
TM
Rev: Orig