AirLive WT-2000USB Guía De Instalación Rápida página 6

5. The system starts to install the software of the adaptor. Please follow the
instructions of the program to plug in the adaptor into the USB port of
your computer. And the system will automatically detect the adaptor.
6. Please click "Finish" to complete the installation.
Use the AirLive Turbo-G Wireless
Configuration Utility
When the adaptor is installed, the AirLive Wireless
configuration utility will be displayed automatically. This
adaptor will auto connect to wireless device which has
better signal strength and no wireless security setting
In Windows XP, there is a "Windows Zero
Configuration Tool" for you to setup wireless clients. If
you want to switch to use AirLive Wireless
configuration utility, please follow one of the ways as
below.
English
4 WT-2000USB