LevelOne PLI-2040 Guía De Instalación Rápida página 5

7. Once installation is completed, run the PLI-2040 utility program. The first screen (Network
Tab) will display information of the compatible devices found, such as their MAC Addresses
and current transfer speeds.
Choose the desired device from the Device Selection, and the information of the selected
device will be displayed in the table.
8. Click Close to exit the PLI-2040 utility.
Setup is now complete.
If your PC is not the device you wish to use with the 200Mbps HomePlug AV Adapter, con-
nect the Ethernet cable from the 200Mbps HomePlug AV Adapter to the desired device.
The 200Mbps HomePlug AV Adapter is now ready for use.
Operation
Operation is completely automatic, and no user intervention is required.
If your HomePlug devices have difficulty communicating with each other, check the following:
Figure 3: PLI-2040 Utility - Network Tab
5