Publicidad
Idiomas disponibles
Idiomas disponibles
Use Instructions.
- Mount the device.
- Unwind the entire cable before starting to use the device.
- Before plugging in, make sure the power button is "Off / 0".
- Plug in the electric current.
- Press the power button and set to "On / I".
- You can vacuum the floor or carpet depending on the position of the brush lever.
- To turn off the appliance press the power button and set to "Off / 0".
- Unplug from the electric current.
- Clean the filter and the device.
- Store.
Empty and clean the dust container.
Internal filter cleaning.
- Open the tank and remove the internal filter.
- Clean the filter only when it is dirty.
- Introduce the filter in water with some neutral soap.
- Do not rub it with anything, just move it submerged in the water.
- Rinse it under the tap with very little water pressure so as not to damage it.
- Let dry completely without rubbing it with anything.
- Once very dry, you can put it back in its housing.
WARNINGS.
- Never wash the filter in the washing machine.
- Never use the appliance without the internal filter.
1. Extended bristles for hard floors.
2. Retracted bristles for carpet.
- Open the dust container.
- Remove the inner filter.
- Empty and clean the tank with a soft dry cloth.
- Clean the filter (instructions in the following section).
- Put the filter back on.
- Close the deposit.
Publicidad
