Publicidad
Idiomas disponibles
Idiomas disponibles
Tips.
- The machine is designed only for domestic use.
- Use the machine following the instructions in this manual.
- If it is the first time you use the machine, first put a long-length comb.
- It is recommended that the hair be clean and totally dry for an effective cut.
- Remove tangles before starting to cut the hair.
- Always clean and lubricate the machine after each use.
- Always keep the machine clean and oiled.
Cleaning the machine cuts hairs.
- Turn off the machine.
- Disconnect the power cable.
- Remove the cutting comb and you can wash it with water or shake to remove all the hairs.
- Allow to dry well if you wash it with water or dry it with absorbent paper, never use cloths.
- Now clean the blade.
- With the cleaning brush, brush the blades well to remove any hairs.
- Grease the blades with the oil supplied.
- Pour several drops of oil along the blade and let it work so that it greases.
- Put the knife protector.
CAUTION:
- Never use abrasive cleaning products or scouring pads.
- Never immerse the machine in water.
- Only the cutting combs can be submerged in water once they have been removed from
the machine.
- Never clean the machine during operation.
- Do not press on the comb or on the blade, they can be damaged.
- Use a soft cloth to clean the handle, never for the blade or the comb.
Storage.
- Make sure that the machine is switched off.
- Remove the cable from the socket.
- Clean and grease the machine.
- Store the machine and its accessories in a safe and dry place where it can not be damaged.
- Loosely wrap the cable around the machine without tension.
- Do not put the machine in places where it could fall.
Specifications.
- Power Input: 220-240 ~ 50 / 60Hz
- Power: 12W
- 4 cutting combs (3mm, 6mm, 10mm, 13mm).
- Carbon stainless steel blades.
9
Publicidad
