TRENDnet TU-S9 Guía De Instalación Rápida página 7

Troubleshooting
Q1: The autorun window does not appear after I put in the Driver CD-
ROM. What should I do?
A1: Go to Start -> Run, type in E:\Driver\Win98_XP\Setup.exe and then
click OK. E:\represents the drive letter that is assigned to your CD-ROM
drive.
Q2: Windows is unable to recognize my hardware. What should I do?
A2:
First, make sure your computer meets the minimum requirements as
specified in Section 1 of this Quick Installation Guide. Second, try
plugging the TU-S9 into a different USB port on your computer.
Q3: Can I use the TU-S9 with my serial keyboard, mouse, or joystick?
A3:
The TU-S9 does not support interrupt transfer mode devices. If your
serial keyboard, mouse, or joystick is an HID Device, it is not supported.
Q4: Can I connect or disconnect the USB cables while the computer is
on?
A4:
Yes, you can connect or disconnect the USB cable while the
computer is on, because the USB interface is Plug-and-Play and hot-
pluggable.
Q5: How do I install the TU-S9 on my Mac?
A5:
Download the Mac drivers and user guide from www.trendnet.com.
Follow the instructions in the user guide for installation instructions.
If you still encounter problems or have any questions regarding the TU-S9 USB
to Serial Converter, please contact TRENDnet's Technical Support Department.
5