Features And Controls; Know Your Pressure Washer - Husqvarna 1337PW Manual Del Propietário

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Spray Gun
High Pressure Hose
Quick Connect Spray Tips
Pump equipped with
Automatic Cool Down System
Air Filter — Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical Injection Siphon/Filter — Used to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke Lever — Prepares a cold engine for starting.
Fuel Tank — Fill tank with recommended fuel.
High Pressure Hose — Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet with Quick Connect— To connect
high pressure hose.

Features and Controls

Nozzle Extension with
Quick Connect
Chemical Injection Siphon/Filter
Fuel Tank
Nozzle Extension with Quick Connect — Permits easy
switching between five different spray tips.
Oil Fill Cap — Fill engine with oil here.
Pressure Control Knob — Varies pressure of high pressure
spray.
Pump — Develops high pressure.
Recoil Starter — Use for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Quick Connect Spray Tips — Chemical injection, 0°, 15°,
25°, and 40°: for various cleaning applications.
Throttle Lever—Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connect garden hose here.
5
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
(on front of engine)
Air Filter
Oil Fill Cap
Pressure
Control Knob
High Pressure Outlet
with Quick Connect
Water Inlet