Technical Support - Logitech G Flight Throttle Quadrant Manual Del Usuario

When you access the Assignments/Controls screen in Flight Simulator, ensure that
the Logitech G Flight Throttle Quadrant is selected in the option labeled Joystick Type.
Now select Joystick Axes (Flight Simulator 2004) or Control Axes (Flight Simulator X)
at the top of the window.
Once you have done this, simply find the command that you want to assign
to your controller from the list of commands, click it and then click the Change
Assignment button. A window will appear asking you to move the part of
your controller that you want to assign to that command - move the axis that
you want to assign to that command and then click OK.
Tip: You must ensure that none of the levers are assigned to the Aileron Axis
or Elevator Axis commands, otherwise they will interfere with your other controller
that you are using alongside the Logitech G Flight Throttle Quadrant.
If you wish to reassign the toggle switches on the Quadrant to other functions then
you must use the Buttons/Keys tab at the top of the Assignments/Controls window.
For more information to programming and using your Throttle Quadrant go to:
logitech.com/support/throttle-quadrant

TECHNICAL SUPPORT

Online Support: support.logitech.com
8 English