Engel AM2000 Manual De Usuario página 53

To set the number of cluster(s) per input:
- Turn the button to select Split UHF mode.
- Push the button to confirm.
- Turn the button to set one configuration:
- Push the button to confirm.
Notes: - UHF1 is set for 2 clusters, UHF2 and UHF3 are set for different number of cluster(s).
- Each cluster can be switched off (Park function). For example if you only need one cluster for UHF1,
set the second cluster on channel 00 to switch it off (see following paragraph "Setting channels /
cluster").
SETTING CHANNELS / CLUSTER:
Each cluster has a bandwidth which can be programmed from 1 to 7 channels:
To set the channel(s) per cluster
In the following example cluster 1 is set for channel 22 to channel 26.
The LED is GREEN.
Split UHF
The LED is RED.
Split UHF
The LED is GREEN.
Split UHF
53