Charging The Battery - Sony PSP-2001 Referencia Rápida

02
Preparation
Preparing the PSP

Charging the battery

Before using the PSP
purchase, you must follow these steps to charge the battery.
Caution
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
• Do not plug the AC power cord for the PSP
electrical outlet until you have made all other connections.
Notice
Before inserting the battery pack, find the serial and model
numbers listed within the battery compartment and make a
record of the numbers for future reference.
1
Remove the battery cover.
While holding down the release button, slide the battery
cover in the direction of the arrow.
Release button
6
system for use
®
system for the first time after
®
system into an
®
2
1
2
Insert the battery pack.
Align the bottom surface of the battery pack with the
system to attach the battery.
2
1
Align the tabs of the battery cover with the system and
snap it in place.
3
4