Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste which is gener-
ated. Dispose of packaging materials which are no longer
needed in accordance with applicable local regulations.
Charging the power bank
Before using the power bank, the integrated battery must be
fully charged.
CAUTION
►
Due to the high battery capacity and bearing in mind
the charging time, the power bank must be charged
using a USB mains adapter.
►
Use only a USB mains adapter with an output voltage
of 5 V and an output current of at least 2.1 A to charge
the power bank.
►
Charging takes about 3 hours.
♦
Connect the USB plug of the charger cable
suitable a USB power supply (not supplied).
♦
Connect the micro-USB plug on the charging cable
the micro-USB charging port (IN)
The current charge level is shown during charging by
means of the charge level LEDs
LED display
One LED is fl ashing
SPBD 5000 A1
to a
on the power bank.
:
Charge level
< 20%
GB│MT
to
55
■
│