Publicidad
Idiomas disponibles
Idiomas disponibles
BATTERY CHARGE
Before first use make sure that both the headset and the charging base are
fully charged.
1. Make sure the headphones are properly connected in place.
2. Press the button on the charging base to turn it on. Close the lid and
start charging from the internal battery. The LED on the base will remain
red while charging the battery. Once loaded it will show blue. Remember
to keep the charging base off (press again to turn off) to save battery.
3. To charge the charging base, connect the wire to a power source.
During charging the led of the charging base will flash.
SECURITY / WARNING
1.
Keep
the
device
away
from
extreme
heat,
humidity
or
corrosive environments.
2. Please prevent the device from hitting or falling, misshapen,
get wet, etc.
3. Do not disassemble the headphones or charging cradle.
4. Please do not overload the
device for a long time, since
decrease battery life.
5. Please stop using the device immediately if it causes discomfort or pain.
6. Use certified DC-5V / 1A chargers / adapters.
The recharging and unloading of the headphones repeatedly will decrease
the performance of the battery over time, which is normal.
7. Each headset is for a specific ear, left or right.
Publicidad
