Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10 Dismounting
10 Dismounting
11 Disposal
11.1 Materials
11.2 Packaging
EN - 18
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to for the entire duration of
maintenance, servicing, mounting, dismounting and repair work:
• Switch off the entire welding system.
NOTICE
• Disassembly may only be carried out by qualified personnel (in Germany
see TRBS 1203).
• Observe also the operating instructions of the welding components, such
as the robot welding power source and welding torch.
• Observe the information provided in the following section:
7 Putting out of operation on page EN-16.
For disposal, observe the local regulations, laws, provisions, standards and
guidelines. Observe the guidelines for the disposal of electronic scrap and
dispose of it at your communal waste disposal authorities (e.g. recycling yard).
For the PSB to be properly disposed of, they first must be dismounted.
See 10 Dismounting on page EN-18
This product consists for the most part of plastics, steel and non-ferrous metals.
11 Disposal on page EN-18
ABICOR BINZEL has reduced the packaging for shipping to a minimum.
Packaging materials are always selected with regard to their possible recycling
ability.
PSB
Publicidad
Tabla de contenido
