Go-Rock GR-WSK350 Manual De Instrucciones página 9

Bluetooth device connection (Pair Bluetooth).
- Turn on the speaker and activate the bluetooth of the external device to pair.
- Search in the external device for the speaker model "GR-WSK350" and select.
- Once the device is paired, you can now listen to music on the speaker.
- Each time you turn on the speaker it will connect to the device automatically as long as
The device has Bluetooth enabled.
- To pair a new device, you have to deactivate the bluetooth of the previous device
and activate the bluetooth of the new device to pair.
- To change songs, pause, increase or decrease volume, see "Buttons Description" section.
Note.
When you turn on the speaker, it goes directly into Bluetooth mode, as long as there is no
TF card and no Pendrive put.
Usb Port / TF Card.
- Turn on the speaker and by default it will enter bluetooth mode.
- If you already have a TF or Pendrive card, you will be able to play their music.
- Insert a pendrive or TF card (MicroSD), with Mp3 music and Fat32 format.
- The speaker will start playing music automatically.
- To change songs, pause, increase or decrease volume, see "Buttons Description" section.
FM Radio.
- Turn on the speaker and by default it will enter bluetooth mode.
- If you have a TF or Pendrive card, you will be able to play their music.
- Press the "Mode" button slowly until the FM mode is selected.
- To change songs, pause, increase or decrease volume, see "Buttons Description" section.
NOTE:
If the reception of the station is not good, connect a Micro USB cable and leave the other end
loose. This cable will do the antenna function.
Aux (Line In).
- Turn on the speaker and by default it will enter bluetooth mode.
- If you have a TF or Pendrive card, you will be able to play their music.
- Connect the jack plug from the external device to this connector.
- Press the "M" button slowly until selecting the Aux (Line In) mode.
- The intensity of the volume will depend on the volume level of the external device.
- It is advisable to set the external device to a medium volume so that the speaker does not
distort.