Recording; Other Functions; Adjusting The Brightness Of The Fluorescent Display - Sherwood RX-4109 Instrucciones De Funcionamiento

RECORDING

•The volume, tone(bass, treble) and balance settings have no effect on the recording signals.
•When you select tuner, CD or PHONO as a recording source, recording may be made on TAPE or AUX, or both
simultaneously.
Recording with TAPE
.
1
Select the desired input as a recording
source except for TAPE.
.
2
Start recording on the TAPE.
.
3
Start play on the desired input.

OTHER FUNCTIONS

Operating the sleep timer
•The sleep timer allows the
system to continue to
operate for a specified
period of time before
automatically shutting off.
•To set the receiver to
automatically turn off after
the specified period of
time, press the SLEEP
button.
•Each time this button is pressed, the sleep time
changes as follows:
→ 10 → 20 → 30 → 60 → 90 → OFF
Unit : minutes
•While operating the sleep timer, "
•When the sleep time is selected, the fluorescent
display is dimly lit.
Recording with AUX
.
1
.
2
.
3
Adjusting the brightness of the
fluorescent display
•Each time this button is pressed, the
brightness of the fluorescent display changes
as follows:
→
•In the display OFF mode, pressing any button
" lights up.
will restore the display ON mode.
15
Select the desired input as a recording
source except for AUX.
Start recording on the AUX.
Start play on the desired input.
→ →
ON dimmer OFF