Maintenance And Cleaning; Technical Specifications - Sencor STS 30WH-NAA1 Manual De Usario

STS 30WH-NAA1 / STS 31GR-NAA1 / STS 32BL-NAA1 / STS 33OR-NAA1 / STS 34RD-NAA1
STS 35VT-NAA1 / STS 36YL-NAA1 / STS 37GG-NAA1 / STS 38RS-NAA1 / STS 3XXX-NAA1

MAINTENANCE AND CLEANING

• Before cleaning, always unplug the toaster and allow it to cool off.
• To remove crumbs from the toaster, slide the crumb tray A7 out and empty it. Put the crumb tray
A7 back in place. Clean the crumb tray A7 after each use. Make sure that crumbs do not build up
in the crumb tray A7, because this may cause a fire. To remove crumbs from inside the toaster, turn
the toaster upside down and shake the crumbs out over a wastebasket.
• Wipe the outside parts of the toaster with a dry or slightly damp cloth and then wipe dry. Make
sure that water and moisture do not enter the toaster.
• Do not use abrasive or caustic cleaners when cleaning the toaster. Do not use metal scouring pads.
Pieces of metal can break off the pad and touch electrical parts, creating an electric shock hazard.
• To prevent potential injury by electric shock, do not immerse any part of the toaster in water or any
other liquid.

TECHNICAL SPECIFICATIONS

Nominal voltage ...................................................................................................................................... 120V
Nominal frequency .................................................................................................................................. 60Hz
Rated power ........................................................................................................................................... 800W
We reserve the right to change text and technical specifications.
Copyright © 2015, Fast ČR, a.s.
Toaster
EN-9
06/2015