Motostar PROXISTAR Manual Del Usuario página 11

Snap the front piece onto the lower part of the base and screw it down using the provided screw. Finally,
mount the fi nishing ring, snapping it into place by pushing down on its surface.
12)
> PROCEDURE<
1- Plug Proxistar into power
grid and approach one of the
two issued keyfobs, maintai-
ning proximity for about 10 to
15 seconds.
2- move it farther away and
way for about 15 to 20 se-
conds for the Master tag to
be logged.
Now this Master tag will allow to memorise the
second keyfob as well as any others( up to 250)
you will add later.
After initialising Proxistar, memorise the second keyfob and any other tags.
> PROCEDURE<
A-Wave the Master, twice, in proximity
of Proxistar;
B- within 10 seconds also approach
the keyfob, you wish to memorise, to
Proxistar for a few seconds, and/or all
the others in sequence.
C- finally, wait 15 to 20 seconds and test
to see it Proxistar works.
If for some reason, more than 10 seconds elapse after a
keyfob approach, Proxistar defaults back to normal mode:
to continue memorising, repeat the procedure from the start
(only for the remaining tags).
13)
HOW TO ACTIVATE PROXISTAR
First, initiate Proxistar, to log a keyfob as the Master tag.
HOW TO MEMORISE OTHER KEYFOBS
3
14)