Dmx Linking - Chauvet DJ Intimidator SPOT 355Z IRC Guía De Referencia Rápida

Intimidator™ Spot 355Z IRC QRG
Menu Map
Main Level
Address
Run Mode
Setup
Sys Info

DMX Linking

Starting Address
Master/Slave
Connection
Programming Levels
001–512
DMX
Auto
Sound
Slave
IR
Pan Reverse
Tilt Reverse
Screen Reverse
Pan Angle
Tilt Angle
Sensitivity
Reset
Factory Set
Ver: VX.X
Running Mode: XXXXX
Dmx Address: XXX
Temperature: XXX
The Intimidator™ Spot 355Z IRC works with a DMX controller. Information
about configuring the Intimidator™ Spot 355Z IRC for DMX operation is in the
User Manual, which
http://www.chauvetlighting.com/product-manuals-literature/. Information about DMX
is in the CHAUVET® DMX Primer, which is available from the CHAUVET®
website: http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address for this product is 498.
The Intimidator™ Spot 355Z IRC works in Master/Slave mode. Information
about configuring this product for Master/Slave operation is in its User
Manual, which
http://www.chauvetlighting.com/product-manuals-literature/.
Sets the DMX starting address
09CH
Selects DMX mode
15CH
Selects auto program
Selects Sound-Active mode
Selects Slave mode
Selects infrared control
OFF
Normal pan operation
ON
Reverse pan operation
OFF
Normal tilt operation
ON
Reverse tilt operation
OFF
Normal display
ON
Reverse display
540
Selects the 540° pan angle range
360
Selects the 360° pan angle range
180
Selects the 180° pan angle range
270
Selects the 270° tilt angle range
180
Selects the 180° tilt angle range
090
Selects the 90° tilt angle range
001–100
Sets sound sensitivity
Resets the product
Loads factory defaults
Displays the software version
Displays the current running mode
Displays the current DMX address
Displays the LED temperature in Celsius
is available
is available from
6
Description
from the CHAUVET®
the CHAUVET®
EN
website:
website: