Insignia NS-DA1902 Guia Del Usuario página 8

Reproductor de cd de 5 discos
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

During playback, press and hold the
SKIP button for 2 seconds to start moving
backward at high speed.
2 Press
PLAY/PAUSE to stop at the desired
point.
Note
or
The
be used to choose a track or file on the
current disc. To choose a track from another
disc, the DISC 1 - 5 select buttons or the
DISC SKIP button should be pressed to get
to the disc you want first.
To go to the next or previous album (MP3):
Press ALBUM UP (next) or ALBUM DOWN
(previous) button.
Random play
To play tracks in random order (shuffle play):
Press the RANDOM button. "RANDOM"
appears on the display and shuffle play
starts.
To cancel random (shuffle) play:
Press the RANDOM button until "RANDOM"
disappears from the display.
Notes
• Random play works for all the
available discs in the disc tray for as
many as 60 songs.
• You can set or cancel the random play
in playback mode or stop mode.
Programmed playback
You can play back the tracks or files on the CDs
in the disc 1-5 positions in any order you want.
By specifying
the disc numbers from 1 to 5 and the track or file
numbers from CD (1 to 254) MP3. A program of
up to 20 tracks or files from all the available discs
in the disc tray can be played in a preset order.
To program playback:
1 Press the MEMORY button (in stop mode).
"MEMORY" appears on the display window.
2 Press the
DISC NO. ("Disc No." blinks on the display
window), then press the MEMORY button to
enter the programmed disc. ("Disc No." stops
blinking.)
3 Press the
a track or file ("Track No." will blink on the
display window), then press the MEMORY
button to enter the programmed track or file.
("Track No." stops blinking.)
4 Repeat Steps 2 and 3 to program other
tracks or files.
5 Press the
PLAY/PAUSE button to start
program playback.
To check the program:
Press the ALBUM UP or ALBUM DOWN
button in program mode. A track or file
number and program number is displayed.
To clear the program:
Press the
STOP button twice or open the
disc tray.
6
(SKIP) buttons can only
or
SKIP) button to select
(
or
SKIP) button to select
(
www.insignia-products.com
To change the programmed tracks or files:
Clear the program and repeat all the steps
again.
Repeat play
A single track, a disc, or all discs can be played
back repeatedly.
To repeat the current track or file:
While a track or file you want to repeat is
playing in normal play, press the REPEAT
button until "REPEAT 1" appears in the
display window.
To repeat all tracks of a disc:
While the disc you want to repeat is playing in
normal play, press the REPEAT button until
"REPEAT 1 DISC" appears on the display
window.
To repeating all discs:
Press the REPEAT button repeatedly until
"REPEAT DISC A" appears on the display
window.
To cancel repeat play:
Press the REPEAT button repeatedly until
"REPEAT 1," "REPEAT 1 DISC," and
"REPEAT DISC A" disappears from the
display window.
Sleep mode
To turn the player off automatically:
1 Press the SLEEP button on the remote
control. "SLEEP" appears in the display
window.
Initial sleep time will be 90 minutes.
2 Press the
front panel to cycle through the available
settings.
Settings include: 240, 210, 180, 150, 120, 90,
60, 30, 10, 5, 4, 3, or 2 minutes.
The CD player will turn off automatically after
the preset sleep time has elapsed.
To cancel the sleep operation:
Press the SLEEP button repeatedly until "NO
SLEEP" appears on the display.
Disc compatibility
CD discs
The CD player can playback audio
CDs (3" (8 cm)/ 5" (12 cm) discs).
MP3 and WMA discs
The ability of this player to read MP3/WMA discs
is dependent on the following:
The bit rate must be within 64 - 256 kbps.
The total number of files on the disc should
not exceed 254.
The maximum number of directories should
not exceed 32.
The maximum depth level of directories
should not exceed 4.
NS-DA1902 5-Disc CD Player
or
SKIP) button on the
(

Publicidad

Tabla de contenido
loading

Tabla de contenido