ATLeisure FRN-600252 Manual Del Usario página 4

Assembly (cont'd)
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product.
Table Step 2: Attach connecting tube to table leg using bolts (AA) and washers (CC)
with hexagon wrench (BB) as shown in the picture. Do not over-tighten bolts.
Table Step 3: Place the table top (A) on a clean, soft, and level surface. Attach the
assembled legs to the table top (A) using bolts (AA) and washers (CC) with hexagon
wrench (BB) as shown in the picture. Leave bolts loosely tightened until all bolts
have been put in place. Then, tighten each bolt.
BB
AA
CC
4
BB
AA
CC
E