Flow Amsterdam Björn Manual De Usuario

User manual
Björn
Polar Bear Shaped Wall Light
Article nr: 1145027
Manual: 5027_14
EN
Björn Wall Light
This friendly guy brightens up the room with a warm white glow. Position it on the wall and it will
keep all bad dreams away. Easy to turn on and o by tapping its nose.
Designed in the Netherlands by Flow Amsterdam
How does the Night Light work?
Buttons
Press the button on the back of of the bear to switch
ON/OFF.
Auto OFF function
The light will shut o automatically after being
inactive for 15 minutes.
Color modes:
When the device is ON, tap the bear to change the
color mode.
1. White (low intensity) 5. Green
2. White (high intensity) 6. Blue
3. Red 7. Color changing mode
4. Yellow 8. O
flow
On / O Button Micro USB
Tap the bear to change color mode
Charging:
Remove Björn from its wall bracket for charging.
Connect Björn with the micro-USB cable to a 5V USB port:
- When charging: a green indication LED is blinking.
- When charging is done: the green indication LED will turn ON.
- When battery is low (<10%): red LED is blinking.
- When is being charged while having a low battery (<10%: red
LED is blinking.
Installing the wall bracket
1: Install the bracket
with screws to the wall
General information
Dimensions Björn 16 x 16 x 10 cm
Weight 190 grams
Power source Rechargeable battery
(800 mAh)
Input DC 5V 500 mA
USB cable included
Light 7 color LED
Charging time 2 hours
Operating time 10-20 hours
Made in China
flow
Manufactured and distributed by:
Flow trading BV
Madridstraat 8
1175 RK Lijnden, the Netherlands
www. owamsterdam.com
Indication
LED
2: Snap Björn on the bracket
Safety information
- Read these user-instructions before using
the night light. Store this manual for future
reference.
- Do not disassemble the product.
- Keep the product away from water. It is
intended for indoor use only.
- Clean Björn with a soft wet cloth, do not
use chemical, corrosion or detergent
products.
- Not for use by children under 3 years.
FIGYELMEZTETÉS !
POZOR !