LF Utilitech Pro UT58104 Manual De Usario página 9

INSTALLATION INSTRUCTIONS FOR SMALL SPACES
4. Unscrew 8 bolts from top of pre-assembled pump
system (A) and remove cord seal (F) and basin lid (E).
5. Remove black inlet cap and o-ring (G) from basin lid (E)
and screw it onto the inlet opening on the side of the
basin (B).
6. Attach trap components to the underside of the basin
lid (E). Make sure the trap height is at least 4 inches to
ensure a proper water seal.
4
F
A
5
G
6
Inlet
E
Trap
9
E
G
E
Side Inlet
Opening
B
Vent
Discharge
Flanged
Tailpipe
Trap Detail
4 in.
Min.
Lowes.com