HOW TO ASSEMBLE WITH MICROWAVE OVEN
· Place the microwave oven in the center of refrigerator, and align the each back sides
· Place the SUPPORTER STACKs to fit the rear screw holes and tighten twelve screws.
(There are two SUPPORTER STACKs. Left and right.)
·Two middle holes of SUPPORTER STACK have no screw holes on the refrigerator.
(Tighten the screws by force)
·Bracket and screws are sold separately.
·Retro Combo Microwave Oven Models : KOR-7LRUEM/KOR-7LRUEW
REFRIGERATOR
MICROWAVE OVEN
NOTE :
• Refrigerator will not operate when the microwave oven is working.
When the microwave is finished, the refrigerator will operate again.
• If the Microwave Oven is unplugged, the refrigerator does not operate.
• If your oven does not operate properly, unplug it from the 120 volt household outlet and then plug it
back in.
This unit is not designed for 50Hz or any circuit other than 120 volt / 60Hz AC current.
SCREW HOLE
Tighten the screws
by force
SCREW HOLE
SCREW
SUPPORTER STACK
9