6
Note: make sure your peripheral is updated with the most recent firmware in order to work
properly with the Gateway.
2.4. Reboot
It may necessary to reboot the gateway in case the link to the network is lost (green LED
turned off). To reset the gateway, simply push the button on the back.
Note resetting the gateway does not affect all the settings.
2.5. Factory Restore
The Gateway can be restored to factory default state including factory firmware version.
To restore the firmware and delete all pairing or status user data, just press the function
button whilst inserting the USB cable.
Restoration is confirmed by means of the Led indicator blinking quickly for a few seconds.
3. USING THE WEB SERVER
3.1. Introduction
Once you have created your account and added all the peripherals you wish to control
remotely, go to the www.beewi-home.com portal under your own account using a web
browser or the web app to view and access them.
More information regarding the functioning of the web server can be found in the Help
page.
3.2. Main screen
The main page (or left panel in computer and tablet views) shows the list of peripherals
with the following information organized in boxes for each peripheral:
- Peripheral type and name
- Connection status and active mode
- Actual parameters such as temperature, humidity, LED color and brightness, etc.
- On/Off buttons for actionable peripherals
3.3. Peripheral screen
By clicking on a specific peripheral, the Control page is opened (or right control panel in
computer and tablet views), giving access to all control functions such as:
- Mode settings
- Alert settings
- History
- Edition
4. CAUTION & WARRANTY EXCEPTIONS
4.1. Taking care of your Product
• Use the product indoor only.
• Avoid storage at extreme temperatures, above 45°C (including direct sunlight) or below
-10°C. This can shorten battery life and may affect operation.
• Do not expose the product to rain or moisture.
• When not in use, always store the product in a safe place.
ENGLISH