Hydroflow hs38 Manual De Instrucciones página 4

LOOPS
An electrical loop occurs when the signal can travel through metal from one side of the
unit to the other (H). If the unit is fitted in a loop, the signal does not propagate correctly
and is trapped in the loop. Earth bonding or pipework is a common cause. Loops cannot be
formed if the unit is fitted to plastic pipe.
Moving the unit to a location outside the loop – for example "before" the earth bonding -
allows the signal to propagate correctly (I). To remove the unit from the pipe, re-insert the
split pin.
A quick test to see if the unit is in a loop is to remove the unit from the pipe, reassemble it
off the pipe, and see if the light becomes brighter.
GUARANTEE
Should a fault occur with this product within the first 3 years after purchase, then the
product will either be repaired or replaced free of charge under the manufacturer's product
guarantee. Guarantee claims are strictly limited to the value of the original purchase price
and HYDROPATH accepts no responsibility for any consequential loss that may result from
a product failure.
• It is a condition of this guarantee that no unauthorised repairs are carried out or
attempted as they will invalidate the guarantee. Faulty product that is within the
guarantee period should be returned to the point of purchase together with a copy of
the bill of receipt.
• HYDROPATH recommends that the unit is wired to a surge-protected power supply,
and no claims will be accepted where product failure or damage is the direct result of a
surge from an unstable power supply.
• Customers should be aware that water leaks from plumbing systems may result as a
consequence of limescale removal. Customers are advised therefore to periodically
inspect the plumbing system to ensure that the system and compression joints in
particular
remain water-tight.
• No claims will be accepted by HYDROPATH for products purchased through un-
authorised vendors or re-sellers.
A list of authorised vendors can be found on our website.
• This guarantee does not affect a customer's statutory rights.