FEBREZE FHT180 Serie Importantes Instrucciones De Seguridad página 3

HOW YOUR FEBREZE
Unique 4-Stage System to help
Clean & Freshen the Air
1
Dirty, stale, odor-filled air is drawn into
the air purifier by a strong fan.
2
The Dual Action Filter has a specially
formulated carbon pre-filter that traps
household odors and larger airborne
particles, such as pet hair, lint
and dust.
1
3
As the air moves through the
HEPA-Type filter, up to 99% of
the microscopic particles, 2 microns
and larger, are captured.
1
4
Fresh Febreze scent is added to the
™
filtered air before it is released back
into the room.
1 From the air that passes through the filter, 2 microns and larger.
Overall particle reduction depends on many factors including the amount of air processed,
the pollutant type, and the pollutant's introduction rate into the environment.
• Select a firm, level and flat location. For best airflow, locate the unit 3 feet (1 M) from
any wall or furniture.
• When operating, large volumes of air are drawn toward the air purifier. Surrounding
areas should be cleaned and/or vacuumed frequently to prevent build-up of dust and
other contaminates. This may also help prolong the life of the filter. If the unit is placed
on a light colored carpet, a small mat or rug should be used underneath to prevent
permanent staining. This is especially important in homes with contamination from
smoking or fireplaces.
ENERGY STAR
This product earned the ENERGY STAR
guidelines set by the US EPA. US EPA does not endorse any manufacturer
claims of healthier indoor air from the use of this product.
The energy efficiency of this ENERGY STAR
based on a ratio between the model's Clean Air Delivery Rate (CADR) for Dust
and the electrical energy it consumes, or CADR/Watt.
4
AIR PURIFIER WORKS
™
2
4
3
1
SET-UP
®
by meeting strict energy efficiency
®
qualified model is measured
®
INSTALLING FEBREZE
The Dual Action Febreze™ HEPA-Type Filter(s)
with built-in pre-filter are supplied within the air
purifier. They are wrapped to ensure purity.
• Turn off and unplug the air purifier. Press
the top latch downward to release the rear
grill, pull the grille towards you and remove it.
Gently push along the edge of the filter frame
and pull forward. If replacing used filter(s), you
may pull the ribbon tabs to remove the filter(s).
If required, repeat for the second filter.
• Remove protective wrap from the filter(s).
• Place back into the air purifier housing
with black side facing out towards the
rear grille and snap rear grille into place.
NOTE: The Febreze™ HEPA-Type filters are
not washable. Do not immerse in water.
INSTALLING THE FEBREZE
One Febreze™ air purifier scent cartridge is supplied
with your new air purifier. It is packed in the same
plastic bag as this Instruction Manual. It is sealed for
freshness.
• Turn off and unplug the air purifier. Open the
door on the Scent Cartridge Compartment on the
control panel.
• Peel the foil layer off the cartridge by pulling on
the tab. Once removed, immediately dispose of
the foil layer. A thin, clear film with perforations
will remain attached to the cartridge. DO NOT
REMOVE.
Note: A thin,
clear film with
perforations will
remain attached
to the cartridge.
DO NOT REMOVE
HEPA-TYPE FILTERS
™
Model FHT190
Model FHT180
SCENT CARTRIDGE
™
NOTE: CAUTION: EYE IRRITANT.
Avoid contact with eyes. Do not
touch the scent pad located within
the cartridge. Contains fragrance
oils. See page 3 for FIRST AID
treatment if necessary.
5