Lenze L-force 8400 motec E82ZBU Instrucciones Para El Montaje página 4

¸
Application area
These instructions describe how to use the E82ZBU.0A switch/potentiometer unit at the
8400 motec inverter.
The connection requires a module communication unit with an analog input and digital
ƒ
inputs and outputs.
For parameter setting, please observe the information given in the mounting instructions
ƒ
for the drive unit.
Wire the switch/potentiometer unit
+10 V/
5 mA
GN
min.

8400 motec with communication unit
‚
Switch/potentiometer unit
ƒ
Wire jumper (permanent controller enable)
Cw CW rotation
Ccw Counter−clockwise rotation
After the switch/potentiometer unit has been connected and the drive unit has been
parameterised, you can control the connected motor via the switch/potentiometer unit.
EDK84DZEBUxx DE/EN/FR/ES/IT 1.0
WH BN PK GY
1 = CW 0 2 = CCW
10k
0
1 2
max.
¸
100 mA
ƒ
YE
‚
4

E84DG061
l