Time Display - ARENDO 300792 Manual Del Usuario

4 Displays and controls

4.1 Time display

The time display shows the duration in which the power was consumed. The
following points should be noted:
• if the measured time is less than an hour, then the time is dis-
played in the "minutes: seconds" format.
• If the measured time is more than an hour, then the time is
displayed in the "hours: minutes" format.
• The display resets itself after 24 hours. The "Day" value of the
COST display is incremented by 1 in this case.
• The power consumption of the connected device should be at
least 2W for the time measurement to continue.
English
Time display
Energy display
Cost display
RESET button
UP button
COST button
ENERGY button
SET button
11