Regent SV278 Instrucciones página 5

SV278/SV278W I.S. 10/21/03
How to select your desired feature
Mode of Mode of
operation: operation:
Test Setting
Lights should turn
on with motion
both day and
night. Lights
should turn OFF
after 4 secs.
Motion Activated
(auto setting)
Lights should turn
on with motion
only at night and
should turn off
after 4 or 12 min.
of no motion.
2 Hour
NIGHT TIME ON
then Motion
Activated
Lights should turn
on automatically at
night 100% bright-
ness for 2 hours,
then reset to
regular auto
motion setting for
the remainder of
the evening.
4 Hour
NIGHT TIME ON
then Motion
Activated
Lights should turn
on automatically at
night 100% bright-
ness for 4 hours,
then reset to
regular auto
motion setting for
the remainder of
the evening.
11:12 AM Page 5
Set slide switch Set slide switch How to set How to set
on sensor to: on sensor to: p ower switch : p ower switch :
Keep the power to
TEST
the fixture on.
AUTO 4 MIN Keep the power to
or the fixture on.
AUTO 12 MIN
NIGHT TIME ON
2 HR
(2 Hours)
Note: Once the light has
Keep the power to
come on in the selected
the fixture on.
"Night Time On" mode, you
cannot change the mode
setting until the next dawn.
The light will operate in the
first "Night Time On" mode
selected (2 hour, 4 hour, or
6 hour), even if changed.
NIGHT TIME ON
4 HR
(4 Hours)
Keep the power to
Note: Once the light has
the fixture on.
come on in the selected
"Night Time On" mode, you
cannot change the mode
setting until the next dawn.
The light will operate in the
first "Night Time On" mode
selected (2 hour, 4 hour, or
6 hour), even if changed.
5
How many times How many times
LED will blink: LED will blink:
3 times
1 time
1 time
1 time
(continued)