Area Measurement - Hammerhead HLMT100 Manual Del Usuario

OPERATION

5. AREA MEASUREMENT

a. Press the power/mode button
to move the cursor to the area
measurement indicator
b. Press the measure button
turn on the laser beam; the laser
indicator will blink.
c. Position the tool to aim the laser
dot at the target to which you
want to measure.
d. Press the measure button
to display the measured length in
first row of the screen.
e. Position the tool to aim the laser dot
at the width target.
f. Press the measure button
again to display the area
MEASURE
computation in the lowest row
of the screen; the width will be
displayed at the same time in the
second row. The laser beam will
turn off.
g. Press the measure button
again to make a new
MEASURE
measurement.
COMPACT LASER MEASURING TOOL
5a
.
to
MEASURE
5b
MEASURE
5c
ft
11