Lupilu LBFW 150 A1 Instrucciones De Uso página 33

Heating milk – fast setting
This function is intended for heating milk rapidly. It should be used for no more
than 20 minutes at a time.
Pour about 150 ml of tap water into the appliance base
CAUTION – MATERIAL DAMAGE!
► Do not fill the appliance base
deposit sediment inside the appliance.
► Ensure that the water level never exceeds the MAX marking
Place the open baby bottle (filled with milk) and the basket
appliance base
Turn the function selector
function indicator
up to a temperature suitable for your baby.
NOTE
► While the milk is heating up, gently wave the bottle back and forth a few
times to ensure the heat is distributed evenly.
Remove the baby bottle from the appliance as soon as the function indicator
lights up blue.
NOTE
► The exact duration of the heating process depends on the quantity of milk
and its original temperature, i.e. room temperature (20°C) or refrigerator
temperature (7°C).
Switch the appliance off by moving the function selector
Ensure that the milk is at a good temperature before feeding your baby.
To do this, spill a few drops of the heated milk onto the inside of your wrist
and check whether the temperature is safe for your baby. A temperature of
approx. 37 °C is suitable as it corresponds to your own body temperature.
■ 30 │ GB │ IE
with mineral water, as the minerals will
.
to the symbol (heat milk – fast setting). The
will light up red and the appliance will heat the milk
.
.
into the
to the position O.
LBFW 150 A1