Ingersoll Rand ENL 5 Instruciones De Instalación Y De Servicio página 17

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

80442874
Installation of the control unit on the service unit :
1.
2.
.
4.
5.
Start-up subsequent to maintenance measures:
Always carry out prior to the start-up:
ingersollrandproducts.com
Check whether or not the service unit (5) goes with
the control unit (1) (model designation and color of
the arresting hook).
Check whether or not the sealing mat (11) or the
sensor tube plate (14) with contact springs (1) are
clean, dry, and free from impurities.
Introduce the sensor (12) into the sensor tube plate
(14).
Hang the hook (15) of the control unit (1) in the sensor
tube plate (14).
Press the control unit (1) against the service unit (5)
and snap into place.
Leak test of the screwed connector
Check of the electrical connections
Check of the correct engagement of the control unit
EN
17

Publicidad

Tabla de contenido
loading

Tabla de contenido