1. Manuales
  2. Marcas
  3. Metra Electronics Manuales
  4. Accesorios de Automóviles
  5. 95-9701
  6. Instrucciones de instalación

Metra Electronics 95-9701 Instrucciones De Instalación

Ocultar thumbs

Publicidad

Idiomas disponibles

Idiomas disponibles

Tabla de contenido

KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) (4) #8 x 3/8" Phillips screws • D) (4) #10-32 x 1/2" Phillips steel machine screws
A
The World's best kits.
®
Harley-Davidson Street Glide, Electra Glide,
Ultra, and Limited models
Road Glide
Visit
specific applications
KIT FEATURES
• ISO DDIN radio provision*
• Designed for models without a radio option**
* This kit can only be used with an ISO DDIN radio that has an "L" shaped chassis
** For models with a radio option use 95-9700
B
MetraOnline.com
2015-Up
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
design, with the radio chassis at the top of the screen. At present only the Sony
XAV-AX100, XAV-AX200, and XAV-AX5000 radios have this design.
C
D
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Fairing Disassembly
2014-Up
/
– Harley Davidson Street Glide, Electra Glide,
Ultra, and Limited models 2014-Up .............2-3
– Harley Davidson Road Glide 2015-Up .............4
Kit Assembly ..........................................................5
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Not applicable
Antenna Adapter: Not applicable*
Steering wheel control interface: Not applicable
  * Use part number 40-UA20 to add an antenna
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx screwdrivers • Allen wrenches
Attention!
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
95-9701
Let the vehicle sit with the key
REV. 9/11/20 INST95-9701

Publicidad

Tabla de contenido
loading

Manuales relacionados para Metra Electronics 95-9701

Resumen de contenidos para Metra Electronics 95-9701

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 9/11/20 INST95-9701...

  • Página 2: Fairing Disassembly

    FAIRING DISASSEMBLY Harley Davidson Street Glide, Electra Glide, Ultra, and Limited models 2014-Up 1. Remove (4) T-27 from inner fairing. (Figure A) 2. Remove (3) T-27 from windshield (caution not to drop the outer fairing or windshield). (Figure B) 3. Remove outer fairing, unplugging the headlight.
  • Página 3 FAIRING DISASSEMBLY (CONT) 5. Remove (11) screws securing the radio bracket: (Figure E) a. (2) T-27 Torx screws shared with the gauge cluster and a third T-27 Torx screw to remove the gauge cluster in step 7. b. (4) 5/32” Allen screws facing outward. c.
  • Página 4 FAIRING DISASSEMBLY (CONT) Harley Davidson Road Glide 2015-Up 1. Remove the lower torx screws on 7. Remove the fairing and set aside. either side holding the wind deflector 8. Remove (4) 3/16 Allen screws from the wings (only the lower two need to be sides of the radio.

  • Página 5: Kit Assembly

    KIT ASSEMBLY 1. Secure the radio brackets to the radio housing with (4) #8 x 3/8” Phillips screws supplied. (Figure A) 2. Slide the radio into the radio housing assembly and secure with screws supplied with the radio. (Figure B) Secure the radio housing assembly to the bike using (4) 3/16 Allen screws previously removed in step 8 of disassembly.
  • Página 6 386.257.1187 MetraOnline.com...
  • Página 7 REV. 9/11/2020 INST95-9701...
  • Página 8 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians The World’s best kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 9/11/20 INST95-9701...
  • Página 9 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 9/11/20 INST95-9701...

  • Página 10: Desmontaje Carenado

    DESMONTAJE CARENADO Harley Davidson Street Glide, Electra Glide, Ultra, and Limited modelos 2014 y Mas 1. Quite los (4) T-27 del carenado interior. (Figura A) 2. Quite los (3) T-27 del parabrisas (tenga cuidado de no dejar caer el carenado exterior o el parabrisas).
  • Página 11 DESMONTAJE CARENADO (CONT) 5. Quite los (11) tornillos que sujetan el soporte del radio: (Figura E) a. (2) Tornillos Torx T-27 que se comparten con el conjunto de indicadores y un tercer tornillo Torx T-27 para quitar el conjunto de indicadores en el paso 7. b.
  • Página 12 DESMONTAJE CARENADO (CONT) Harley Davidson Road Glide 2015 y Mas 1. Quite los tornillos Torx inferiores de 7. Quite el carenado y déjelo a un lado. cada lado que sostienen los deflectores 8. Quite los (4) tornillos Allen de 3/16 de los de viento (solo deben quitarse los dos lados del radio.

  • Página 13: Ensamble Del Kit

    ENSAMBLE DEL KIT 1. Atornille los soportes del radio a la carcasa del radio con los (4) tornillos Phillips de cabeza plana suministrados. (Figura A) 2. Deslice el radio en el ensamble de la carcasa del radio y sujételo con los tornillos suministrados con el radio.
  • Página 14 386.257.1187 MetraOnline.com...
  • Página 15 REV. 9/11/2020 INST95-9701...
  • Página 16 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). The World’s best kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 9/11/20 INST95-9701...

Tabla de contenido