Rain C- Compact Instrucciones página 25

RAIN s.p.a.
via Kennedy 38/40
20023 Cerro Maggiore
ITALY (MI)
CONNECTING VALVE WIRES TO THE TIMER
• Remove the terminal com-
partment cover.
• Strip _" (6mm) of the plastic
insulation off the end of each
wire.
• Determine which valve you
want to connect to which
station. Connect each
valve wire to its station termi-
nal (labeled 1-6) by inserting
the bare wire fully into
the terminal.
• It will be necessary to open the terminal to allow for wire
insertion or removal.
To do this you will need to use a small phillips head screwdriver.
• Connect the common wire to the terminal labeled "com"
25