MAC TOOLS JSA2200AJ El Manual Del Propietario página 5

INSPECTION
WARNING
Failure to follow these Inspection instructions may result in serious injury or death, and/or property damage.
Visual inspection should be made before each use of the jack, checking for leaking hydraulic fluid and damaged, loose or missing parts. Each jack must be
inspected by a manufacturer's repair facility immediately if subjected to an abnormal load or shock. Any jack which appears to be damaged in any way, is found
to be badly worn, or operates abnormally MUST BE REMOVED FROM SERVICE until necessary repairs are made by a manufacturer's authorized repair facility.
It is recommended that an annual inspection of the jack be made by a manufacturer's authorized repair facility and that any defective parts, decals or warning
labels be replaced with manufacturer's specified parts. A list of authorized repair facilities is available from the manufacturer.
TROUBLESHOOTING
PROBLEM
1. Unit will not lift rated load.
2. Unit will not sustain rated load or feels "spongy" under rated load.
3. Unit will not lift to full height.
4. Unit still does not operate.
JSA2200AJ
JSA2200AJ
22-TON
AIR/HYDRAULIC TRUCK JACK
ACTION
Purge air from hydraulic system by following procedure under SETUP.
Purge air from hydraulic system as above.
Purge air from hydraulic system as above.
Contact your Mac Tools Distributor.
5
CAPACITY
5/1316