General Information; Product Description; Before Use - Pro-Lift T-5350B Manual De Piezas E Instrucciones De Funcionamiento

GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this
lift. The owner and operator of this equipment shall have an understanding of this lift and safe operating procedures
before attempting to use. The owner and operator shall be aware that use and repair of this product may require
special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language
before use of this lift is authorized. If any doubt exists as to the safe and proper use of this jack, remove from service
immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
lift that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service im-
mediately. If the lift has been or suspected to have been subjected to a shock load (a load dropped suddenly, unex-
pectedly upon it), immediately discontinue use until lift has been checked by a factory authorized service center. It is
recommended that an annual inspection be done by qualified personnel. Labels and Owner's Manuals are available
from manufacturer (see Replacement Parts, page 5).

PRODUCT DESCRIPTION

The Pro-Lift Lawn Mower Lift is specifically designed to lift and support up to rated capacity loads consisting of a
single Riding Lawn Mower whose frame is compatible with the lifting members of the lift. This lift is NOT suitable
for lifting, leveling and/or positioning cars, trucks, SUV's or conveyances other than those specifically listed and ap-
proved above. This lift is NOT suitable for lifting, leveling and/or positioning houses, construction trailers or dwellings
in general. This product is designed to be permanently assembled. The Hydraulic unit is not to be used independ-
ently of the lift.
SPECIFICATIONS
Base Size (L x W)
38-1/2" x 14-1/8"

BEFORE USE

Inspect lift before each use:
1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly with the product
and the hazards associated with its improper use.
2. Ensure that rollers and lift arms move freely. Check for and tighten any loose assemblies. Do not use if cracked,
broken, bent or otherwise damaged parts are noted or if the lift is suspected to have been subjected to a shock
load. A shock load is caused by rapidly opening and closing the release valve while the lift is loaded. Such opera-
tion may result in a hydraulic overload which may damage the hydraulic unit.
3. Verify that the product and the application are compatible. Incompatibility is evident when the loaded mower
wobbles, feels unstable, and/or does not set securely in the lift's wheel baskets. Tying down incompatible loads
will not make the loads secure and may cause unexpected loss of load resulting in personal injury and/or property
damage.
4. Owner and operators of this device shall be aware that no serviceable or replaceable parts are available for
this device other than those parts listed on page 5. Any lift that appears to be damaged in any way, is worn or
operated abnormally shall be removed from service immediately until such time as repairs can be made. Do not
attempt to weld, rivet or otherwise repair this device.
5. DO NOT modify or alter this device. It is recommended that an annual inspection be done to this device by
qualified persons and that missing or damaged labels, warning/safety decals be replaced with factory authorized
labeling.
Lift Surface Capacity
Wheel Bracket 350 lbs.
Compatible Wheel Track
46" - 51" outside span
2
Lift Height
20"