Ibx R10 Manual De Instrucciones página 3

Service
In order to guarantee this equipment Works safely and efficiently, it must have a regular
maintenance. In case of any faults, do not try to repair it yourself. If help is needed, you can always
contact your dealer or Labbox via www.labbox.com
Please provide the customer care representative with the following information:
• Serial number
• Description of problem
• Your contact information
Installation
1. Check voltage specified on name-plate on the bottom. Make sure if it matches the line voltage in
your location.
2. Install the instrument in a clean, dust-less and ventilated area under 40℃.
3. To enable suction function, connect the inlet of the pump to the outlet of objective equipment
with a high-pressure hose.
Assembly & Disassembly diagram
Position
1
2
3
3
Designation
Air inlet
Air outlet
On/Off switch