Grill King 810-2545-C Manual Del Propietário página 28

Step 16
Firmly seat the valve nozzle into the
burner venturi. Hold in place while
you perform Step 17 .
Step 17
Insert the two screws that are
already attached on the side burner
valve through the corresponding key
holes on the side burner front panel
and bezel, from the back of the side
burner front panel. Depending on the
side burner valve, you will be using
either the outside key holes
(Figure 1), or the inside key holes
(Figure 2). Pull the valve downward
or upward to lock into place. Then
tighten the two screws.
Warning: Never use your grill
without leak testing
all gas connections
and hoses. See the
section on "Leak
Testing" in this
manual for proper
procedures.
Step 18
Install the side burner control knob
onto valve stem. Place the side
burner grate onto the side burner
table.
27
Side
Burner
Valve
Valve
Nozzle
Figure 1
Side Burner
Grate
Burner Venturi
Figure 2
Bezel
Side
Burner
Control
Knob