Publicidad
Step 1 - Assemble the walls of the fire pit cabinet
Locate one fire pit panel with the attached mounting tabs and one panel without tabs as shown in Fig. 1a.
Ubique un panel del "FirePit" con las tabs de montaje adjunta y un panel sin tabs como se muestra en Figura 1a.
Figure 1a
Place the two panels together as shown in Fig. 1b. Align the mounting tabs with the pre-drilled holes and use the ¾"
screws included in your kit to fasten the two panels together.
Coloque los dos paneles juntos como se muestra en figura 1b. Alinee las tabs de montaje con los orificios y utilice
los tornillos ¾ "incluidos en el kit para sujetar los dos paneles juntos.
Figure 1b
v100813
Panel with
Mounting Tabs
Panel without
Mounting Tabs
Align with
Pre-drilled Holes
pg . 1
Publicidad
